Loibisch
30th December 2002, 00:15
I got the instructions from INA, and it worked just fine. I can hear directional sounds a lot better now that I installed the Audigy 2 drivers on my SBLive! card. However it's a little bit of work (mainly reboots). Here's the deal:
Download the Base Driver Package here (http://users2.ev1.net/~dallasstar/sb_install_multilang.rar)
Download the update for the driver package here (http://www.americas.creative.com/support/files/download.asp?Centric=280&nLangID=1&sDestURL=http%3A%2F%2Fwww%2Eamericas%2Ecreative%2E com%2Fsupport%2Ffiles%2Fdownload%2Easp&sRef=http%3A%2F%2Fwww%2Eamericas%2Ecreative%2Ecom% 2Fsupport%2Fwelcome%2Easp%3Fcentric%3D280) (just select your OS and download the "AUD2DRVL11021217.exe" file).
Download the "fix" here (http://members.aol.com/dvdking2001/Pub/ctcomp.exe).
1. Extract the base driver package and the update from the creative site to separate folders.
2. Run the "fix", browse to: "base driver package dir\Audio\Setup\" and hit "install".
3. Run the "fix" again, this time browse to: "update package dir\" and hit "install".
4. Proceed to uninstall your previous SBLive drivers and Software and reboot.
5. Go to the following dir: "base driver package dir\CTRun\" and run the file "CTRun.exe". Follow the instructions, then reboot.
6: Run the file Setup.exe in your "update package dir\" folder. Follow the instructions, then reboot.
7. Make sure the following is set in your UT2003.ini file: UseDefaultDriver=True
Setting this line to false will produce horrible results (at least on Live cards).
Have fun :)
Download the Base Driver Package here (http://users2.ev1.net/~dallasstar/sb_install_multilang.rar)
Download the update for the driver package here (http://www.americas.creative.com/support/files/download.asp?Centric=280&nLangID=1&sDestURL=http%3A%2F%2Fwww%2Eamericas%2Ecreative%2E com%2Fsupport%2Ffiles%2Fdownload%2Easp&sRef=http%3A%2F%2Fwww%2Eamericas%2Ecreative%2Ecom% 2Fsupport%2Fwelcome%2Easp%3Fcentric%3D280) (just select your OS and download the "AUD2DRVL11021217.exe" file).
Download the "fix" here (http://members.aol.com/dvdking2001/Pub/ctcomp.exe).
1. Extract the base driver package and the update from the creative site to separate folders.
2. Run the "fix", browse to: "base driver package dir\Audio\Setup\" and hit "install".
3. Run the "fix" again, this time browse to: "update package dir\" and hit "install".
4. Proceed to uninstall your previous SBLive drivers and Software and reboot.
5. Go to the following dir: "base driver package dir\CTRun\" and run the file "CTRun.exe". Follow the instructions, then reboot.
6: Run the file Setup.exe in your "update package dir\" folder. Follow the instructions, then reboot.
7. Make sure the following is set in your UT2003.ini file: UseDefaultDriver=True
Setting this line to false will produce horrible results (at least on Live cards).
Have fun :)